Back to Ricerca

Diaphragm pumps - in polypropylene and aluminum

Submitted by Stefano on Wed, 07/12/2017 - 12:47
Waste oil | Fresh oil | Antifreeze | Windshield fluid | Water | Diesel fuel | AdBlue® | Paint | Cleaning detergent

Diaphragm pumps - in polypropylene and aluminum

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed with an aluminium motor while the parts coming into contact with the fluid are in polypropylene. This is in order to offer a solution that can also be used in aggressive working environments with corrosive atmospheres, as well as for use with water-based solutions, detergents and corrosive fluids, while the pump continues to respect the ATEX directive. The vast range of diaphragms and valves that can be used ensure these products are fully modular and customised.

▶ View the landing page

Diaphragm pumps - in polypropylene and aluminum
Catalogue
FAQ
Request Information
Video

s. 120-PPAB multiple inlet/oulet 1/2" - flow rate 60 l/min

s. 120-PPAB double inlet/multiple oulet 1/2" - flow rate 60 l/min

s. 1000-PPAB 1" - flow rate 170 l/min

s. 1000-PPAB double inlet 1" - flow rate 170 l/min

diaphragm pumps for drums

1/2" - 1:1 ratio - flow rate 60 l/min - s. 120-PB

1/2" - 1:1 ratio - flow rate 60 l/min - s. 120-PB double inlet



Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Max pressurebar
Max cicles for minutecpm
Delivery for cicleslitres
Max suction liftm
Max size pumpable solidsmm
Max working temperature°C
Noise leveldB
Max air consumptionm3/min
Air working pressurebar
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
PackingN° - m3
Gross weightkg
2B3/16117EA5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
1 - 0,02
5,8
2B3/16117HH5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0,02
5,8
2B3/16117NH5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0,02
5,8
2B3/16117SS5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
Santoprene™
Santoprene™
polypropylene and AISI 316 stainless steel
1 - 0,02
5,8
2B3/16117TT5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
1 - 0,02
5,8
Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Max pressurebar
Max cicles for minutecpm
Delivery for cicleslitres
Max suction liftm
Max size pumpable solidsmm
Max working temperature°C
Noise leveldB
Max air consumptionm3/min
Air working pressurebar
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
PackingN° - m3
Gross weightkg
2B8/16117EA5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
1 - 0,02
5,7
2B8/16117HH5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0,02
5,7
2B8/16117NH5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
1 - 0,02
5,7
2B8/16117SS5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
Santoprene™
Santoprene™
polypropylene and AISI 316 stainless steel
1 - 0,02
5,7
2B8/16117TT5
60
1:1
8
330
0,188
dry column 4,5 - wet column 7,5
1,5
65
75
0,50
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
1 - 0,02
5,7
Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Max pressurebar
Max cicles for minutecpm
Delivery for cicleslitres
Max suction liftm
Max size pumpable solidsmm
Max working temperature°C
Noise leveldB
Max air consumptionm3/min
Air working pressurebar
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
PackingN° - m3
Gross weightkg
2B4/26117EAI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
EPDM
acetal
AISI 316 stainless steel
1 - 0,03
7
2B4/26117HHI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Hytrel®
Hytrel®
AISI 316 stainless steel
1 - 0,03
7
2B4/26117NHI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
NBR
Hytrel®
AISI 316 stainless steel
1 - 0,03
7
2B4/26117SSI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Santoprene™
Santoprene™
AISI 316 stainless steel
1 - 0,03
7
2B4/26117TTI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
PTFE+Hytrel®
PTFE
AISI 316 stainless steel
1 - 0,03
7
Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Max pressurebar
Max cicles for minutecpm
Delivery for cicleslitres
Max suction liftm
Max size pumpable solidsmm
Max working temperature°C
Noise leveldB
Max air consumptionm3/min
Air working pressurebar
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
PackingN° - m3
Gross weightkg
2B7/26117EAI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
EPDM
acetal
AISI 316 stainless steel
1 - 0,03
12,1
2B7/26117HHI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Hytrel®
Hytrel®
AISI 316 stainless steel
1 - 0,03
12,1
2B7/26117NHI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
NBR
Hytrel®
AISI 316 stainless steel
1 - 0,03
12,1
2B7/26117SSI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Santoprene™
Santoprene™
AISI 316 stainless steel
1 - 0,03
12,1
2B7/26117TTI
170
1:1
8
300
0,590
dry column 5 - wet column 7,5
3
65
75
1,60
2 ÷ 6
G 3/8" (f)
G 1/2" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
PTFE+Hytrel®
PTFE
AISI 316 stainless steel
1 - 0,03
12,1
Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Compatible fluids
Internal flanges and motor engine material
Wetted parts
Ball valve material
Air inlet connection
Fluid inlet-outlet connection
Working pressurebar
Max supply pressurebar
Average air consumptionl/min
Noise leveldB
Fluid temperature°C
Max size pumpable solidsmm
Suction-delivery ball valve with spring
Bung adaptorP/N
Suction tubemm
PackingN° - m3
Weightkg
33514
50
1:1
antifreeze and windshield washing liquid
aluminum
polypropylene
Teflon®
G 3/8" (f)
G 3/4" (f) x G 1/2" (f)
2 ÷ 6
8
400
75
-10 ÷ +65
ø 1,5
cylindrical ball valve with spring
33434
940 - ø 34
2 - 0,034
12,45
33516
50
1:1
antifreeze and windshield washing liquid
aluminum
polypropylene
Teflon®
G 3/8" (f)
G 3/4" (f) x G 1/2" (f)
2 ÷ 6
8
400
75
-10 ÷ +65
ø 1,5
cylindrical ball valve with spring
33434
1240 - ø 34
2 - 0,034
12,48
Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Compatible fluids
Motor and inside flanges material
Wetted parts
Ball valve material
Air inlet connection
Fluid inlet-outlet connection
Air working pressurebar
Max supply pressurebar
Average air consumptionl/min
Noise leveldB
Fluid temperature°C
Max solids diametermm
Suction-delivery ball valve with spring
PackingN° - m3
Weightkg
Dimensions (A-B-C)cm
2B3/16117NH52
60
1:1
water, mineral-vegetable oils, diesel fuel
aluminum
polypropylene
Hytrel®
G 3/8" (f)
G 3/4" (f) x G 1/2" (f)
2 ÷ 6
8
400
75
-10 ÷ +65
ø 1,5
cylindrical ball valve with spring
1 - 0,015
7,5
17,8 - 21,8 - 32,6
2B3/16117TT52
60
1:1
antifreeze and windshield washing liquid
aluminum
polypropylene
Teflon®
G 3/8" (f)
G 3/4" (f) x G 1/2" (f)
2 ÷ 6
8
400
75
-10 ÷ +65
ø 1,5
cylindrical ball valve with spring
1 - 0,015
7,5
17,8 - 21,8 - 32,6
Art.
Product sheet
Documentation
Flow ratel/min
Ratio
Compatible fluids
Motor and inside flanges material
Wetted parts
Ball valve material
Air inlet connection
Fluid inlet-outlet connection
Air working pressurebar
Max supply pressurebar
Average air consumptionl/min
Noise leveldB
Fluid temperature°C
Max solids diametermm
Suction-delivery ball valve with spring
PackingN° - m3
Weightkg
Dimensions (A-B-C)cm
2B8/16117NH52
60
1:1
water, mineral-vegetable oils, diesel fuel
aluminum
polypropylene
Hytrel®
G 3/8" (f)
dual inlet/multi-ported outlet G 3/4" (f) x G 1/2" (f)
2 ÷ 6
8
400
75
-10 ÷ +65
ø 1,5
cylindrical ball valve with spring
1 - 0,015
7
17,8 - 22 - 32,6
2B8/16117TT52
60
1:1
antifreeze and windshield washing liquid
aluminum
polypropylene
Teflon®
G 3/8" (f)
dual inlet/multi-ported outlet G 3/4" (f) x G 1/2" (f)
2 ÷ 6
8
400
75
-10 ÷ +65
ø 1,5
cylindrical ball valve with spring
1 - 0,015
7
17,8 - 22 - 32,6

IDFamiglia = 48


     


	
 
   

  
The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models have been designed with an aluminium motor while the parts coming into contact with the fluid are in polypropylene. This is in order to offer a solution that can also be used in aggressive working environments with corrosive atmospheres, as well as for use with water-based solutions, detergents and corrosive fluids, while the pump continues to respect the ATEX directive. The vast range of diaphragms and valves that can be used ensure these products are fully modular and customised.




▶ View the landing page 
 
ENG
Descrizione Breve: 
The pneumatic diaphragm pumps with aluminium motor and polypropylene parts are recommended for the pumping of aggressive fluids; they are ATEX certified.
Foto(URL): 
Famiglie/Pompe-membrana-ibride.jpg
Settore Aeronautica: 
Settore Agricoltura: 
Macrofamiglia: 
Diaphragm pumps
Tipologia Fluido: 
Waste oil
Fresh oil
Antifreeze
Windshield fluid
 Water
Diesel fuel
AdBlue®
 Paint
Cleaning detergent
Settore Automotive: 
Settore Veicoliindustriali: 
Settore Cleaning: 
Settore Edilizia: 
Settore TrasportiFerroviari: 
Settore IndustriaChimica: 
Settore IndustriaManifatturiera: 
Settore LubrificazioneCentralizzata: 
Settore Navale: 
Settore IndustriaMineraria: 
Brochure Promozionale: 
BrochurePromozionale\Inglese\PompeMembrana\WRCPM405-PM-GB CATALOGO POMPE MEMBRANA bassa.pdf
Video: 
Video/Come lavora una pompa a membrana.mp4
ID Famiglia: 
48
LinkVideo: 
/en/video?field_vidmacrofamiglia_value_i18n=Pompe+a+membrana
Scheda Prodotto: 
SchedaProdotto/Italiano/19_WRCPM405-PM-I CATALOGO POMPE MEMBRANA bassa-compressed.pdf
Gruppo FAQ: 
11
Posizione: 
280
parole di ricerca: 
Diaphragm pumps - in polypropilene and aluminum, diaphragm pump - in polypropilene and aluminum, pneumatic diaphgram pumps, pneumatic diaphgram pump, alluminium and polypropilene pump, alluminium and polypropilene pumps, pneumatic pump in alluminium and polypropilene, pneumatic pumps in alluminium and polypropilene, pump, pumps, diaphgram pump, diaphgram pumps, polypropilene pump, polypropilene pumps, alluminium pump, alluminium pumps, alluminium diaphgram pump, polypropilene diaphgram pump, alluminium diaphgram pumps, polypropilene diaphgram pumps, 2B3/16117EA5, 2B3/16117HH5, 2B3/16117NH5, 2B3/16117NH52, 2B3/16117SS5, 2B3/16117TT5, 2B3/16117TT52, 2B8/16117EA5, 2B8/16117HH5, 2B8/16117NH5, 2B8/16117NH52, 2B8/16117SS5, 2B8/16117TT5, 2B8/16117TT52, 33514, 33516, 2B4/26117EAI, 2B4/26117HHI, 2B4/26117NHI, 2B4/26117SSI, 2B4/26117TTI, 2B7/26117EAI, 2B7/26117HHI, 2B7/26117NHI, 2B7/26117SSI, 2B7/26117TTI, polypropylene