Back to Ricerca

Diaphragm pumps - entirely in polypropylene

Waste oil | Fresh oil | Antifreeze | Windshield fluid | Water | Diesel fuel | AdBlue® | Paint | Cleaning detergent

Diaphragm pumps - entirely in polypropylene

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models are designed entirely in polypropylene to allow the pump to also be used in aggressive working environments with corrosive atmospheres, as well as for use with water-based solutions, detergents and corrosive fluids. The vast range of diaphragms and valves that can be used ensure these products are fully modular and customised.

View the landing page

Diaphragm pumps - entirely in polypropylene


Art.
Product sheet
Documentation
Flow rate
Ratio
Max pressure
Max cicles for minute
Delivery for cicles
Max suction lift
Max size pumpable solids
Max working temperature
Noise level
Max air consumption
Air working pressure
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
Packing
Gross weight
2A3/1677EA5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A3/1677HH5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A3/1677NH5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A3/1677SS5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
Santoprene
Santoprene
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A3/1677TT5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
Art.
Product sheet
Documentation
Flow rate
Ratio
Max pressure
Max cicles for minute
Delivery for cicles
Max suction lift
Max size pumpable solids
Max working temperature
Noise level
Max air consumption
Air working pressure
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
Packing
Gross weight
2A8/1677EA5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A8/1677HH5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
Hytrel®
Hytrel®
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A8/1677NH5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
NBR
Hytrel®
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A8/1677SS5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
Santoprene
Santoprene
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
2A8/1677TT5
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet G 3/4" (f)
G 1/2" (f)
cylindrical ball valve
PTFE+Hytrel®
PTFE
polypropylene and AISI 316 stainless steel
No. 1 - 24x19x40 cm
5,8 kg
Art.
Product sheet
Documentation
Flow rate
Ratio
Max pressure
Max cicles for minute
Delivery for cicles
Max suction lift
Max size pumpable solids
Max working temperature
Noise level
Max air consumption
Air working pressure
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
Packing
Gross weight
2A4/2677EAI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
EPDM
acetal
AISI 316 stainless steel
No. 1 - 34x23x49 cm
9,6 kg
2A4/2677HHI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Hytrel®
Hytrel®
AISI 316 stainless steel
No. 1 - 34x23x49 cm
9,6 kg
2A4/2677NHI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
NBR
Hytrel®
AISI 316 stainless steel
No. 1 - 34x23x49 cm
9,6 kg
2A4/2677SSI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Santoprene
Santoprene
AISI 316 stainless steel
No. 1 - 34x23x49 cm
9,6 kg
2A4/2677TTI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
PTFE+Hytrel®
PTFE
AISI 316 stainless steel
No. 1 - 34x23x49 cm
9,6 kg
Art.
Product sheet
Documentation
Flow rate
Ratio
Max pressure
Max cicles for minute
Delivery for cicles
Max suction lift
Max size pumpable solids
Max working temperature
Noise level
Max air consumption
Air working pressure
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Balls for inlet
Membranes
Balls
Seats
Packing
Gross weight
2A7/2677EAI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
EPDM
acetal
AISI 316 stainless steel
No. 1 - 39x23x45 cm
9,6 kg
2A7/2677HHI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Hytrel®
Hytrel®
AISI 316 stainless steel
No. 1 - 39x23x45 cm
9,6 kg
2A7/2677NHI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
NBR
Hytrel®
AISI 316 stainless steel
No. 1 - 39x23x45 cm
9,6 kg
2A7/2677SSI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
Santoprene
Santoprene
AISI 316 stainless steel
No. 1 - 39x23x45 cm
9,6 kg
2A7/2677TTI
145 l/min
1:1
8 bar
270 cpm
0,540 l
dry column 5 m - wet column 7,5 m
3 mm
65 °C
78 dB
1,1 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
dual inlet ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ANSI 150 - DIN PN 10 - JIS 10K 1" (25 mm) proneness to G 1.1/4" (f) thread
ball valve
PTFE+Hytrel®
PTFE
AISI 316 stainless steel
No. 1 - 39x23x45 cm
9,6 kg
Art.
Product sheet
Documentation
Flow rate
Ratio
Max pressure
Max cicles for minute
Delivery for cicles
Max suction lift
Max size pumpable solids
Max working temperature
Noise level
Max air consumption
Working pressure
Air inlet connection
Air outlet connection (muffler)
Fluid inlet connection
Fluid outlet connection
Suction-delivery ball valve with spring
Membranes
Balls
Seats
Bung adaptor
Suction tube
Packing
Gross weight
33517
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
p/n 33434
940 mm - ø 34
33518
65 l/min
1:1
8 bar
350 cpm
0,188 l
dry column 4,5 m - wet column 7,5 m
1,5 mm
65 °C
76 dB
0,89 m3/min
2 ÷ 6 bar
G 3/8" (f)
G 3/4" (f)
G 3/4" (f) (G 1" (f) for drum)
G 1/2" (f)
cylindrical ball valve
EPDM
acetal
polypropylene and AISI 316 stainless steel
p/n 33434
1240 mm - ø 34


IDFamiglia = 47


     

The RAASM pneumatic diaphragm pumps are designed with a 1:1 compression ratio and made to pump a vast range of fluids, with high viscosity and with solid parts in suspension. These models are designed entirely in polypropylene to allow the pump to also be used in aggressive working environments with corrosive atmospheres, as well as for use with water-based solutions, detergents and corrosive fluids. The vast range of diaphragms and valves that can be used ensure these products are fully modular and customised.

View the landing page
ENG
Descrizione Breve: 
The pneumatic diaphragm pumps in polypropylene are recommended for the pumping of particularly corrosive fluids such as anti-freeze, water-based solutions and detergents.
Foto(URL): 
Famiglie/Pompe-membrana-polipropilene.jpg
Settore Aeronautica: 
Settore Agricoltura: 
Macrofamiglia: 
Diaphragm pumps
Tipologia Fluido: 
Waste oil
Fresh oil
Antifreeze
Windshield fluid
Water
Diesel fuel
AdBlue®
Paint
Cleaning detergent
Settore Automotive: 
Settore Veicoliindustriali: 
Settore Cleaning: 
Settore Edilizia: 
Settore TrasportiFerroviari: 
Settore IndustriaChimica: 
Settore IndustriaManifatturiera: 
Settore LubrificazioneCentralizzata: 
Settore Navale: 
Settore IndustriaMineraria: 
Brochure Promozionale: 
BrochurePromozionale\Inglese\PompeMembrana\WRCPM405-PM-GB CATALOGO POMPE MEMBRANA bassa.pdf
Video: 
Video/Come lavora una pompa a membrana.mp4
ID Famiglia: 
47
LinkVideo: 
/en/video?field_vidmacrofamiglia_value_i18n=Pompe+a+membrana
Scheda Prodotto: 
SchedaProdotto/Italiano/23_WRCPM405-PM-I CATALOGO POMPE MEMBRANA bassa-compressed.pdf
Gruppo FAQ: 
11
Posizione: 
270
parole di ricerca: 
Diaphragm pumps - entirely in polypropilene, diaphragm pump - entirely in polypropilene, pneumatic diaphragm pumps, pneumatic diaphragm pump, polypropilene pump, polypropilene pumps, pneumatic pump in polypropilene, pneumatic pumps in polypropilene, pump, pumps, diaphragm pump, diaphragm pumps, polypropilene, 2A3/1677EA5, 2A3/1677HH5, 2A3/1677NH5, 2A3/1677SS5, 2A3/1677TT5, 2A8/1677EA5, 2A8/1677HH5, 2A8/1677NH5, 2A8/1677SS5, 2A8/1677TT5, 33517, 33518, 2A4/2677EAI, 2A4/2677HHI, 2A4/2677NHI, 2A4/2677SSI, 2A4/2677TTI, 2A7/2677EAI, 2A7/2677HHI, 2A7/2677NHI, 2A7/2677SSI, 2A7/2677TTI, polypropylene